Follow This Tweaks...
[Start] [Run] [Regedit]
Registry Key: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\LanmanServer\Parameters
Modify/Create the Value Data Type(s) and Value Name(s) as detailed below.
Data Type: REG_DWORD [Dword Value] // Value Name: Autodisconnect
Value Data: [Enter a new disconnect time. Use Hexadecimal if you are unfamiliar with Binary]
Exit Registry and Reboot
Showing posts with label best it tweaks. Show all posts
Showing posts with label best it tweaks. Show all posts
Tuesday
Cellphone Tips and Tricks
NOKIA 5110/5120/5130/5190 3110/3330 6110/6120/6130/6150/6190
Ericson T65/T20/T28/R310/
Siemens C25
Dancall
Alcatel
Samsung SGH600/2100DB
Philips
Panasonic gd90/gd93/GD70
ACER V750
Genie DB NEC db2000 Trium Geo/Geo @ - Astral - Cosmo -Aria
Telit GM 810
Sagem MC959/940
Sagem MC920
Sony CMD Z5/J5
Motorola V3688
Nokia
NOKIA 5110/5120/5130/5190
IMEI number: * # 0 6 #
Software version: * # 0 0 0 0 #
Simlock info: * # 9 2 7 0 2 6 8 9 #
Enhanced Full Rate: * 3 3 7 0 # [ # 3 3 7 0 # off]
Half Rate: * 4 7 2 0 #
Provider lock status: #pw+1234567890+1
Network lock status #pw+1234567890+2
Provider lock status: #pw+1234567890+3
SimCard lock status: #pw+1234567890+4
NOKIA 6110/6120/6130/6150/6190
IMEI number: * # 0 6 #
Software version: * # 0 0 0 0 #
Simlock info: * # 9 2 7 0 2 6 8 9 #
Enhanced Full Rate: * 3 3 7 0 # [ # 3 3 7 0 # off]
Half Rate: * 4 7 2 0 #
NOKIA 3110
IMEI number: * # 0 6 #
Software version: * # 0 0 0 0 # or * # 9 9 9 9 # or * # 3 1 1 0 #
Simlock info: * # 9 2 7 0 2 6 8 9 #
NOKIA 3330
*#06#
This will show your warranty details *#92702689#
*3370#
Basically increases the quality of calling sound, but decreases battery length.
#3370#
Deactivates the above
*#0000#
Shows your software version
*#746025625#This shows if your phone will allow sim clock stoppage
*4370#
Half Rate Codec activation. It will automatically restart
#4370#
Half Rate Codec deactivation. It will automatically restart
Restore Factory Settings
To do this simply use this code *#7780#
Manufacturer Info
Date of Manufacturing *#3283#
*3001#12345# (TDMA phones only)
This will put your phone into programming mode, and you'll be presented with the programming menu.2) Select "NAM1"
3) Select "PSID/RSID"
4) Select "P/RSID 1"
Note: Any of the P/RSIDs will work
5) Select "System Type" and set it to Private
6) Select "PSID/RSID" and set it to 1
7) Select "Connected System ID"
Note: Enter your System ID for Cantel, which is 16401 or 16423. If you don't know yours, ask your local dealer for it.
Select "Alpha Tag"
9) Enter a new tag, then press OK
10) Select "Operator Code (SOC)" and set it to 2050
11) Select "Country Code" and set it to 302 for Canada, and 310 for the US.
12) Power down the phone and power it back on again
ISDN Code
To check the ISDN number on your Nokia use this code *#92772689#
FOR NOKIA MODELS THAT WE ARE NOT REFERRING TO, TRY ONE OF THE PREVIOUS CODES
Ericsson
Ericson T65
*#05# Fake Insert puk screen Press no to exit
Ericsson T20
MENU tecnichal Info
[type] >*<<*<* Displays : 1] Info service 1] Info SW 2] Info hardware 3] SIMlock 4]setup 2] Service setup 1] Contrast 3]Service Test 1] Display 2]Leds 3]Keyboard 4] ringer 5] Vibration 6]Headset 7] Microphone 8]Clock 4] Names List MENU info [Type] >*<<>*<<*<* menu Tecnichal info SW vers. and name list >*<<>
Network and Subnetwork : NCK and NSCK
<> are the right and left menu's keys
Ericsson T18s/T10/A1018s
>*<<*<* software CXC125065 Internal product code PRG 970715 1515 Software version and SW rev. <* CLR <>
>*<<*<*> Displays texts and messages in the phone
It will be displayed " TEXT " then push YES
<> are the right and left menu's keys
!!!>
Control /Enable SIM Lock!!!
Ericsson R310
Technical Info : >*<<*<* Options : 1) service Info info Software Simlock Configuration 2) Service Test Display Led/Illumination Keyboard ringer Vibration Headset Microphone Clock 3)Text's name List Info personal : >*<<>*<<*<*> WORKS WITH EVERY ERICSSON AND IT USUALLY REVEALS A HIDDEN MENU
Siemens
Siemens C25
IMEI number: * # 0 6 #
Software version: put off sim card and enter: : * # 0 6 # and press LONG KEY
Bonus screen: in phone booke: + 1 2 0 2 2 2 4 3 1 2 1
Bosch
IMEI Number: * # 0 6 #
Dafault Language: * # 0 0 0 0 #
Net Monitor: * # 3 2 6 2 2 5 5 * 8 3 7 8 #
Alcatel
IMEI number: * # 0 6 #
Software version: * # 0 6 #
Net Monitor: 0 0 0 0 0 0 *
Samsung
Samsung SGH600/2100DB
IMEI number: * # 0 6 #
Software version: * # 9 9 9 9 # albo * # 0 8 3 7 #
Net Monitor: * # 0 3 2 4 #
Chaning LCD contrast: * # 0 5 2 3 #
Memory info: * # 0 3 7 7 # albo * # 0 2 4 6 #
Reset pamieci (SIMLOCK`a removing!!!): *2767*3855#
Reset pamieci CUSTOM: *2767*2878#
Battery state: * # 9 9 9 8 * 2 2 8 #
Alarm beeper: *#9998*289#
Vibra test: *#9998*842#
Dancall
IMEI number: * # 0 6 #
Software version: * # 9 9 9 9 #
Philips
*#3333*# Displays the blocking list.
*#7489*# Displays the security code.
*#06# Displays the IMEI number.
*#8377*# Displays the SW info.
Panasonic
Panasonic gd90 gd93
*#9999# SW - Type the code on switch on , during network seek
-Vers. SW and production code
Enable ringing and vibration contemporarily
Enable vibration with # then increase volume with "tone menu "
Panasonic gd70
*#9999# SW - Type the code on switch on , during network seek
-Vers. SW and production code
Enable ringing and vibration contemporarily
Enable vibration with # then increase volume with "tone menu "
Acer
Acer V 750
*#400# Display Adc/ Set Cal-Value -
*#402# Set LCD Contrast
*#403# Display Errors Info
*#300# Display Info Hw & Sw
*#301# Menu Test
*#302# Menu Acoustics
*#303# (Settings saved) Set English language?
*#307# Menu Engineering
*#311# Reset Phone Code - [ Also reset Security Codes ! ]
*#330# (Execute not success) [ unknown ]
*#331# (Service deactivated) [ unknown ]
*#332# (Service unavailable)[ unknown ]
*#333# (Execute not success)[ unknown ]
*#351# (Service unavailable) [ unknown ]
*#360# (Invalid input)[ unknown ]
*#361# (Invalid input) [ unknown ]
*#362# (Invalid input) [ unknown ]
*#363# (Invalid input) [ unknown ]
Genie
Genie DB
*#06# IMEI.
*#2254*# Near Cell Mode.
For every received BTS will be displayed :
Current channel and 2 channel levels
*#06# IMEI
*#2558# time of network connection ( D/H/M )
*#2562# Fores reconnection to network
!!!*#7489# Dispalys and modify phones' security code!!!
!!!*#3377# SIM lock information !!!
*#7378# SIM card Informations : supported phase name and tipe
*#7693# Enable/disable "Sleep Mode"
*#8463# State of "Sleep Mode"
*#2255# Debug Call Mode enable/disable
*#3333*# Displays the blocking list.
*#7489*# Displays the security code
*#06# Displays the IMEI number
*#8377*# Displays the SW info.
NEC
NEC db2000
*#2820# software vers.
IMEI *#06#
Reset *73738# (send?)
SP Lock info:
* # 3210 # (send?)
Network barring info : *#8140# (send?)
( it could harm your phone )
SIM lock it could harm your phone )
*#4960 # (send?) -Inquiry * 4960 * password * password # (send?) lock
#4960* password # (send?) unlock
[password] [8 digits]
Net Lock
*#7320# (send?) -Inquiry * 7320 * password * password # (send?) lock
#7320* password # (send?) unlock
[password] [ 8 digits]
Net Lock 2:
*#2220# (invio) - Inquiry * 2220 * password * password # (send?) lock
#2220* password # (invio?)unlock
[password] [8 digits]
Unlock subnetwork
*#1110# (send?) - inquiry * 1110 * password * password # (send?) lock
#1110* password # (send?) unlock
[password] [n° 8 cifre]
( it could harm your phone )
Trium
Trium Geo/Geo @ - Astral - Cosmo -Aria
Enter the menu and type *
A new menu will be displayed :
Application : SW version and battery's voltage
Trium Galaxy
Push * and type 5806: Production date and SW version
Telit
Telit GM 810
MONITOR - technical menu - : type ++++ and push OK.
Adiacent cells list : # and *
Now if you push OK the phone displays battery ' s voltage and temperature
Sagem
Sagem MC959/940
Select commands' menu and push *
Displays a new menu' :
Appli : software vers. and battery's voltage
Eprom
Sim Lock
Test LCD: display test , green/red and vibration
Sagem MC920
Select commands' menu and push *
Displays 5 new menus :
1 APPLI
VERSION ( SW)
BATTERY (voltage )
2 PROM (IMEI)
3!!! SIM LOCK (10 digits code requested ) !!!
4- NETWORK (returns : OPTION NOT AVAILABLE)
5- TEST LCD
SYMBOL 1 (LCD)
SYMBOL 2 (test2 LCD)
BLACK (all icons and carachters displayed )
FOR PHOTO (welcome message and time )
VIBRATOR (vibration test )
Sony
Sony CMD Z5/J5
Vers. SW :
Without SIM , switch on phone and type l *#7353273#
Eprom
!!! Sim Lock [10 digits code ] ( it could harm your phone )
NETWORK : OPTION NOT AVAILABLE
Test LCD: display test of the green/red leds and vibration
Push * and type 4329 :enables/disables network monitor 1 (the same of MT35)
Push * and type 621342 :enables/disables network monitor 2
Push * and type 5807 : Serial Number Software Vers.
Push * and type 936505: IMEI -- Software Vers.
TPush * and type 547 : Test serial Data Cable DISPLAYS :"Testmode"
Push * and type 362628: ISMI BLOCK (UNKNOWN)
Push * and type 476989: NS BLOCK (UNKNOWN)
Push * and type 482896:CP BLOCK (UNKNOWN)
Push * and type 787090: ? BLOCK (UNKNOWN)
Push * and type 787292 : block current network
!!! Push * and type 967678: SP LOCK!!!
Push * and type 850696:Warm Start ( ENABLE/DISABLE)
Push * and type 3926 : Swicth off phone
Push * and type 5806: Production date and SW version
Motorola
Motorola V3688
IMEI *#06#
Enhanced Full Rate Codec EFR
Enable EFR : [][][] 119 [] 1 [] OK.
disable EFR : [][][] 119 [] 0 [] OK
Ericson T65/T20/T28/R310/
Siemens C25
Dancall
Alcatel
Samsung SGH600/2100DB
Philips
Panasonic gd90/gd93/GD70
ACER V750
Genie DB NEC db2000 Trium Geo/Geo @ - Astral - Cosmo -Aria
Telit GM 810
Sagem MC959/940
Sagem MC920
Sony CMD Z5/J5
Motorola V3688
Nokia
NOKIA 5110/5120/5130/5190
IMEI number: * # 0 6 #
Software version: * # 0 0 0 0 #
Simlock info: * # 9 2 7 0 2 6 8 9 #
Enhanced Full Rate: * 3 3 7 0 # [ # 3 3 7 0 # off]
Half Rate: * 4 7 2 0 #
Provider lock status: #pw+1234567890+1
Network lock status #pw+1234567890+2
Provider lock status: #pw+1234567890+3
SimCard lock status: #pw+1234567890+4
NOKIA 6110/6120/6130/6150/6190
IMEI number: * # 0 6 #
Software version: * # 0 0 0 0 #
Simlock info: * # 9 2 7 0 2 6 8 9 #
Enhanced Full Rate: * 3 3 7 0 # [ # 3 3 7 0 # off]
Half Rate: * 4 7 2 0 #
NOKIA 3110
IMEI number: * # 0 6 #
Software version: * # 0 0 0 0 # or * # 9 9 9 9 # or * # 3 1 1 0 #
Simlock info: * # 9 2 7 0 2 6 8 9 #
NOKIA 3330
*#06#
This will show your warranty details *#92702689#
*3370#
Basically increases the quality of calling sound, but decreases battery length.
#3370#
Deactivates the above
*#0000#
Shows your software version
*#746025625#This shows if your phone will allow sim clock stoppage
*4370#
Half Rate Codec activation. It will automatically restart
#4370#
Half Rate Codec deactivation. It will automatically restart
Restore Factory Settings
To do this simply use this code *#7780#
Manufacturer Info
Date of Manufacturing *#3283#
*3001#12345# (TDMA phones only)
This will put your phone into programming mode, and you'll be presented with the programming menu.2) Select "NAM1"
3) Select "PSID/RSID"
4) Select "P/RSID 1"
Note: Any of the P/RSIDs will work
5) Select "System Type" and set it to Private
6) Select "PSID/RSID" and set it to 1
7) Select "Connected System ID"
Note: Enter your System ID for Cantel, which is 16401 or 16423. If you don't know yours, ask your local dealer for it.
Select "Alpha Tag"
9) Enter a new tag, then press OK
10) Select "Operator Code (SOC)" and set it to 2050
11) Select "Country Code" and set it to 302 for Canada, and 310 for the US.
12) Power down the phone and power it back on again
ISDN Code
To check the ISDN number on your Nokia use this code *#92772689#
FOR NOKIA MODELS THAT WE ARE NOT REFERRING TO, TRY ONE OF THE PREVIOUS CODES
Ericsson
Ericson T65
*#05# Fake Insert puk screen Press no to exit
Ericsson T20
MENU tecnichal Info
[type] >*<<*<* Displays : 1] Info service 1] Info SW 2] Info hardware 3] SIMlock 4]setup 2] Service setup 1] Contrast 3]Service Test 1] Display 2]Leds 3]Keyboard 4] ringer 5] Vibration 6]Headset 7] Microphone 8]Clock 4] Names List MENU info [Type] >*<<>*<<*<* menu Tecnichal info SW vers. and name list >*<<>
Network and Subnetwork : NCK and NSCK
<> are the right and left menu's keys
Ericsson T18s/T10/A1018s
>*<<*<* software CXC125065 Internal product code PRG 970715 1515 Software version and SW rev. <* CLR <>
>*<<*<*> Displays texts and messages in the phone
It will be displayed " TEXT " then push YES
<> are the right and left menu's keys
!!!>
Control /Enable SIM Lock!!!
Ericsson R310
Technical Info : >*<<*<* Options : 1) service Info info Software Simlock Configuration 2) Service Test Display Led/Illumination Keyboard ringer Vibration Headset Microphone Clock 3)Text's name List Info personal : >*<<>*<<*<*> WORKS WITH EVERY ERICSSON AND IT USUALLY REVEALS A HIDDEN MENU
Siemens
Siemens C25
IMEI number: * # 0 6 #
Software version: put off sim card and enter: : * # 0 6 # and press LONG KEY
Bonus screen: in phone booke: + 1 2 0 2 2 2 4 3 1 2 1
Bosch
IMEI Number: * # 0 6 #
Dafault Language: * # 0 0 0 0 #
Net Monitor: * # 3 2 6 2 2 5 5 * 8 3 7 8 #
Alcatel
IMEI number: * # 0 6 #
Software version: * # 0 6 #
Net Monitor: 0 0 0 0 0 0 *
Samsung
Samsung SGH600/2100DB
IMEI number: * # 0 6 #
Software version: * # 9 9 9 9 # albo * # 0 8 3 7 #
Net Monitor: * # 0 3 2 4 #
Chaning LCD contrast: * # 0 5 2 3 #
Memory info: * # 0 3 7 7 # albo * # 0 2 4 6 #
Reset pamieci (SIMLOCK`a removing!!!): *2767*3855#
Reset pamieci CUSTOM: *2767*2878#
Battery state: * # 9 9 9 8 * 2 2 8 #
Alarm beeper: *#9998*289#
Vibra test: *#9998*842#
Dancall
IMEI number: * # 0 6 #
Software version: * # 9 9 9 9 #
Philips
*#3333*# Displays the blocking list.
*#7489*# Displays the security code.
*#06# Displays the IMEI number.
*#8377*# Displays the SW info.
Panasonic
Panasonic gd90 gd93
*#9999# SW - Type the code on switch on , during network seek
-Vers. SW and production code
Enable ringing and vibration contemporarily
Enable vibration with # then increase volume with "tone menu "
Panasonic gd70
*#9999# SW - Type the code on switch on , during network seek
-Vers. SW and production code
Enable ringing and vibration contemporarily
Enable vibration with # then increase volume with "tone menu "
Acer
Acer V 750
*#400# Display Adc/ Set Cal-Value -
*#402# Set LCD Contrast
*#403# Display Errors Info
*#300# Display Info Hw & Sw
*#301# Menu Test
*#302# Menu Acoustics
*#303# (Settings saved) Set English language?
*#307# Menu Engineering
*#311# Reset Phone Code - [ Also reset Security Codes ! ]
*#330# (Execute not success) [ unknown ]
*#331# (Service deactivated) [ unknown ]
*#332# (Service unavailable)[ unknown ]
*#333# (Execute not success)[ unknown ]
*#351# (Service unavailable) [ unknown ]
*#360# (Invalid input)[ unknown ]
*#361# (Invalid input) [ unknown ]
*#362# (Invalid input) [ unknown ]
*#363# (Invalid input) [ unknown ]
Genie
Genie DB
*#06# IMEI.
*#2254*# Near Cell Mode.
For every received BTS will be displayed :
Current channel and 2 channel levels
*#06# IMEI
*#2558# time of network connection ( D/H/M )
*#2562# Fores reconnection to network
!!!*#7489# Dispalys and modify phones' security code!!!
!!!*#3377# SIM lock information !!!
*#7378# SIM card Informations : supported phase name and tipe
*#7693# Enable/disable "Sleep Mode"
*#8463# State of "Sleep Mode"
*#2255# Debug Call Mode enable/disable
*#3333*# Displays the blocking list.
*#7489*# Displays the security code
*#06# Displays the IMEI number
*#8377*# Displays the SW info.
NEC
NEC db2000
*#2820# software vers.
IMEI *#06#
Reset *73738# (send?)
SP Lock info:
* # 3210 # (send?)
Network barring info : *#8140# (send?)
( it could harm your phone )
SIM lock it could harm your phone )
*#4960 # (send?) -Inquiry * 4960 * password * password # (send?) lock
#4960* password # (send?) unlock
[password] [8 digits]
Net Lock
*#7320# (send?) -Inquiry * 7320 * password * password # (send?) lock
#7320* password # (send?) unlock
[password] [ 8 digits]
Net Lock 2:
*#2220# (invio) - Inquiry * 2220 * password * password # (send?) lock
#2220* password # (invio?)unlock
[password] [8 digits]
Unlock subnetwork
*#1110# (send?) - inquiry * 1110 * password * password # (send?) lock
#1110* password # (send?) unlock
[password] [n° 8 cifre]
( it could harm your phone )
Trium
Trium Geo/Geo @ - Astral - Cosmo -Aria
Enter the menu and type *
A new menu will be displayed :
Application : SW version and battery's voltage
Trium Galaxy
Push * and type 5806: Production date and SW version
Telit
Telit GM 810
MONITOR - technical menu - : type ++++ and push OK.
Adiacent cells list : # and *
Now if you push OK the phone displays battery ' s voltage and temperature
Sagem
Sagem MC959/940
Select commands' menu and push *
Displays a new menu' :
Appli : software vers. and battery's voltage
Eprom
Sim Lock
Test LCD: display test , green/red and vibration
Sagem MC920
Select commands' menu and push *
Displays 5 new menus :
1 APPLI
VERSION ( SW)
BATTERY (voltage )
2 PROM (IMEI)
3!!! SIM LOCK (10 digits code requested ) !!!
4- NETWORK (returns : OPTION NOT AVAILABLE)
5- TEST LCD
SYMBOL 1 (LCD)
SYMBOL 2 (test2 LCD)
BLACK (all icons and carachters displayed )
FOR PHOTO (welcome message and time )
VIBRATOR (vibration test )
Sony
Sony CMD Z5/J5
Vers. SW :
Without SIM , switch on phone and type l *#7353273#
Eprom
!!! Sim Lock [10 digits code ] ( it could harm your phone )
NETWORK : OPTION NOT AVAILABLE
Test LCD: display test of the green/red leds and vibration
Push * and type 4329 :enables/disables network monitor 1 (the same of MT35)
Push * and type 621342 :enables/disables network monitor 2
Push * and type 5807 : Serial Number Software Vers.
Push * and type 936505: IMEI -- Software Vers.
TPush * and type 547 : Test serial Data Cable DISPLAYS :"Testmode"
Push * and type 362628: ISMI BLOCK (UNKNOWN)
Push * and type 476989: NS BLOCK (UNKNOWN)
Push * and type 482896:CP BLOCK (UNKNOWN)
Push * and type 787090: ? BLOCK (UNKNOWN)
Push * and type 787292 : block current network
!!! Push * and type 967678: SP LOCK!!!
Push * and type 850696:Warm Start ( ENABLE/DISABLE)
Push * and type 3926 : Swicth off phone
Push * and type 5806: Production date and SW version
Motorola
Motorola V3688
IMEI *#06#
Enhanced Full Rate Codec EFR
Enable EFR : [][][] 119 [] 1 [] OK.
disable EFR : [][][] 119 [] 0 [] OK
Sunday
Make your own Home Theater Projector
Projection TV Instructions
These plans are very simple! Results may vary by types of materials you use. Works on TVs or monitors.
Materials
These are the things you will need to make your 100" projection TV!
Magnifying glass- Please note if it has a bifocal lens it will not work!!
Sturdy cardboard (or fiberboard).
Duct tape
Black paint or paper
3 pencils
Small mirror (about 3"x3")(optional, you don't really need this).
Four small washers that fit snug around the pencils.
Step1> Measure your screen (vertical and horizontal).
Step2> Cut the side pieces (A and B) for your projector. (Using your measurements from step 1.) Again use 35" for length. This allows the room to adjust the focus. Be sure to cut as straight as possible!
Step 3> Cut the top and bottom pieces (C and D.) (Using your measurements from step 1). Again use 35" for length.
Step 4> Cut out your slider (E). This piece will be the one that slides in and out of your projector! This allows for the focussing. Use your screen measurement from step 2 & 3. Then, find the center, mark it with your pencil!
Step 5> Remove the glass lens form your magnifying glass. Set it exactly on the cent or your slider. Trace around it, and cut our the circle very carefully. Lens must fit snugly in the hole!
Step 6> Now you have all your pieces cut. Now you either paint all pieces black, or cover with black construction paper. If painting, use more than one coat!
Step 7> Now start to assemble your projector. Place pieces A,B,C, & D together and tape them together using your duct tape. Tape both sides so you don't get any light showing through.
Step 8> Now connect the two side together using duct tape. Do this carefully, and now you should have a rectangular box!
Step >9 Insert your glass lens into the hole you cut inb the slider. THIS MUST FIT TIGHTLY. It must be flush with slider. This is a little tricky, but is not impossible!
Step >10 Take to unsharpened pencils and poke them through your slider (E) about one inch from the sides, not the top and bottom. Then put a washer on each end if the pencils. Use some tape if necessary to ensure pencils do not slide in and out! Only push a LITTLE of the pencil through, just enough to secure them. The pencils allow you to push pull the slider in and out to adjust your focus. If pencils interfere with your picture, pull them out after you have focussed your projector and put tape over the holes!
Step 11> Place your slider about halfway in the box. Your slider must fit squarely inside the box!
Step 12> Turn your TV or monitor upside down and carefully attach your projector. Use tape or any other way you desire! Should fit tightly and no light should shine through the box.
Step 13> Turn your TV or monitor on and adjust your slider to focus your picture. This may take a while. The further away from the wall, the larger your picture will be! The darker the room, the clearer your picture will be.
Step 14> If your image is reversed, place a mirror at a 45 degree angle in front of the lens. You may have to turn the screen in its back. Same principle used in school overhead projectors.
Step 15> After the projector is setup and focussed, cut the remaining front pieces away. This allows for better viewing.
These plans are very simple! Results may vary by types of materials you use. Works on TVs or monitors.
Materials
These are the things you will need to make your 100" projection TV!
Magnifying glass- Please note if it has a bifocal lens it will not work!!
Sturdy cardboard (or fiberboard).
Duct tape
Black paint or paper
3 pencils
Small mirror (about 3"x3")(optional, you don't really need this).
Four small washers that fit snug around the pencils.
Step1> Measure your screen (vertical and horizontal).
Step2> Cut the side pieces (A and B) for your projector. (Using your measurements from step 1.) Again use 35" for length. This allows the room to adjust the focus. Be sure to cut as straight as possible!
Step 3> Cut the top and bottom pieces (C and D.) (Using your measurements from step 1). Again use 35" for length.
Step 4> Cut out your slider (E). This piece will be the one that slides in and out of your projector! This allows for the focussing. Use your screen measurement from step 2 & 3. Then, find the center, mark it with your pencil!
Step 5> Remove the glass lens form your magnifying glass. Set it exactly on the cent or your slider. Trace around it, and cut our the circle very carefully. Lens must fit snugly in the hole!
Step 6> Now you have all your pieces cut. Now you either paint all pieces black, or cover with black construction paper. If painting, use more than one coat!
Step 7> Now start to assemble your projector. Place pieces A,B,C, & D together and tape them together using your duct tape. Tape both sides so you don't get any light showing through.
Step 8> Now connect the two side together using duct tape. Do this carefully, and now you should have a rectangular box!
Step >9 Insert your glass lens into the hole you cut inb the slider. THIS MUST FIT TIGHTLY. It must be flush with slider. This is a little tricky, but is not impossible!
Step >10 Take to unsharpened pencils and poke them through your slider (E) about one inch from the sides, not the top and bottom. Then put a washer on each end if the pencils. Use some tape if necessary to ensure pencils do not slide in and out! Only push a LITTLE of the pencil through, just enough to secure them. The pencils allow you to push pull the slider in and out to adjust your focus. If pencils interfere with your picture, pull them out after you have focussed your projector and put tape over the holes!
Step 11> Place your slider about halfway in the box. Your slider must fit squarely inside the box!
Step 12> Turn your TV or monitor upside down and carefully attach your projector. Use tape or any other way you desire! Should fit tightly and no light should shine through the box.
Step 13> Turn your TV or monitor on and adjust your slider to focus your picture. This may take a while. The further away from the wall, the larger your picture will be! The darker the room, the clearer your picture will be.
Step 14> If your image is reversed, place a mirror at a 45 degree angle in front of the lens. You may have to turn the screen in its back. Same principle used in school overhead projectors.
Step 15> After the projector is setup and focussed, cut the remaining front pieces away. This allows for better viewing.
Saturday
Mouse Wheel Tricks
If you have a mouse with a scroll wheel on it, you can do some cool tricks.......
1.Shift & Spin
Ever wonder what happens when you hold down the Shift key on a web page and spin the wheel on your wheel mouse? Explorer goes either back or forward, depending on which direction you spin.
Give it a try. Open up Internet Explorer(or any other browser) and follow a few links. Then, hold down your SHIFT key and spin that wheel.
2.CTRL & Spin
If you are in a web browser (Explorer or Netscape or Firefox) , hold down your Ctrl key and spin the wheel. It makes the text larger or smaller depending on which way you spin. For Opera users, it magnifies both the images and the text
1.Shift & Spin
Ever wonder what happens when you hold down the Shift key on a web page and spin the wheel on your wheel mouse? Explorer goes either back or forward, depending on which direction you spin.
Give it a try. Open up Internet Explorer(or any other browser) and follow a few links. Then, hold down your SHIFT key and spin that wheel.
2.CTRL & Spin
If you are in a web browser (Explorer or Netscape or Firefox) , hold down your Ctrl key and spin the wheel. It makes the text larger or smaller depending on which way you spin. For Opera users, it magnifies both the images and the text
Friday
Increase your hardisk speed
To speed up your hard disk speed we need to configure a special buffer in the computer's memory in order to enable it to better deal with interrupts made from the disk.
This tip is only recommended if you have 256MB RAM or higher.
Follow these steps:
Run SYSEDIT.EXE from the Run command.
Expand the system.ini file ********
Scroll down almost to the end of the file till you find a line called [386enh].
Press Enter to make one blank line, and in that line type
Irq14=4096
Note: This line IS CASE SENSITIVE!!!
Click on the File menu, then choose Save.
Close SYSEDIT and reboot your computer.
Done. Speed improvement will be noticed after the computer reboots.
Update: The most speed improvement is visible with IDE drives, however there are reports that this tweak also does good for SCSI disks. In any case, it won't harm your system.
This tip is only recommended if you have 256MB RAM or higher.
Follow these steps:
Run SYSEDIT.EXE from the Run command.
Expand the system.ini file ********
Scroll down almost to the end of the file till you find a line called [386enh].
Press Enter to make one blank line, and in that line type
Irq14=4096
Note: This line IS CASE SENSITIVE!!!
Click on the File menu, then choose Save.
Close SYSEDIT and reboot your computer.
Done. Speed improvement will be noticed after the computer reboots.
Update: The most speed improvement is visible with IDE drives, however there are reports that this tweak also does good for SCSI disks. In any case, it won't harm your system.
Thursday
PreviewConfig Tool Registers File Types for the Preview Pane in Windows Vista
Windows Vista introduces the Preview pane in Explorer, which shows the contents of the currently chosen file. You can also play multimedia files from the Preview pane, without opening Windows Media Player. This article explains how to use the PreviewConfig utility to register a custom file type for the Preview pane in Windows Vista Explorer.
Registering file types for the Preview pane
If you have a custom file type and wish to register a plain text or a multimedia Preview handler for the custom file type, you can do so using this utility.
Usage
Download and run PreviewHandler utility (requires administrative privileges to run). Select the file type from the listing, and choose the type of Preview you want for this file type (Media / Plain-text / None), and click Apply.
Additional details are available in the Readme.txt file.
Adding new file types
If a file type is not displayed in the listing, you may manually type the file extension (example, .cpp) into the text box provided, and choose the Preview type for this file extension.
Example
You may use this utility to register text previews for plain-text file types such as:
.REG | .CSS | .BAT | .CMD | .INF | .CS | .VB | .CPP | .SQL
Preview Handler information
When you select a file type, the information of the Preview handler registered for the file type will be displayed in the text box. You can copy the contents to Clipboard by double-clicking the text box.
How to enable the Preview pane in Windows Vista
You can enable the preview pane by selecting Organize | Layout | Preview Panefrom the folder’s menu.
